In the early days of the development of the industrial computer industry, the hard disks of the general industrial computer were mechanical hard disks. With the advancement of technology, solid-state hard disks came out and replaced them with faster speeds than mechanical hard disks. The industrial computers purchased today are basically equipped with solid-state hard disks. hard disk. So what are the advantages of using solid-state drives for industrial computers?

First of all, the reading speed is faster. The reading speed of solid-state hard drives can generally reach 550M/s, and the writing speed can reach more than 380M/s. The reading and writing speed is 3-5 times that of ordinary mechanical hard drives. If the hard disk installed in the industrial computer is based on the selection of appropriate solid-state hard disk parameters by the CPU, the processing speed will be greatly improved. Secondly, no magnetic head is not afraid of vibration. The mechanical hard disk has a high-speed magnetic head, which has poor shock resistance. Mechanical hard drives are easily damaged in the event of a collision or severe vibration. The solid-state hard disk adopts the chip storage scheme, and there is no magnetic head inside. Even for sports or vibration, it is not easy to damage. Therefore, many hard disks of industrial control machines with harsh application environments will choose solid-state hard disks. Agrade Agrade industrial-grade mSATA SSD adopts standard mSATA size specifications, supports wide temperature (-40~+85°C), and can be used normally in harsh environments.

Again, low power consumption and no noise! Solid-state drives have low power consumption, while mechanical hard drives have high power consumption; under the same operating environment, solid-state drives basically do not hear any noise, while the disk rotation and vibration in the mechanical hard drive will make louder sounds, and the longer the use time, the less noise more obvious.

Finally, no heat, low heat dissipation requirements! The solid-state hard disk has low heat, even for a long time, the surface does not feel obvious heating. After the mechanical hard disk has been running for a period of time, the heating will be more serious. If the heat dissipation design of the chassis is not scientific, it is easy to cause the temperature to be too high, and at the same time damage the hard disk CPU industrial computer. Other components such as hard disks usually cooperate with low-power CPUs, so solid-state hard disks are often selected. To sum up, that is the summary of some advantages of solid-state drives!